Fixing Up Your Concrete

« Back to Home

Tips For Your First Time Using Ready Mix Concrete

Posted on

Using ready mix concrete can be an excellent option for allowing you to complete your own paving projects. However, you might not have poured concrete before, which can leave you ill-prepared for overseeing this particular project.

Avoid Deviating From The Ready Mix Concrete Instructions

Your ready mix concrete will have detailed instructions on it for effectively using it. Unfortunately, it is a common issue for people to fail to exactly follow these instructions. This can be due to trying to modify the mixture or simply failing to read these directions. When this mixture is improperly prepared or used, it will be far less likely to provide stable and desirable results. In fact, the concrete can fail to harden or become excessively brittle due to failure to adhere to these directions.

Check The Weather

Concrete will need to be poured in suitable weather conditions. Rain and extremely high humidity can interfere with the wet cement. Prior to starting to pour your concrete, the weather should be checked, and the project should only continue if the forecast is free of rain for at least a couple of days. If a rainstorm suddenly occurs, you may want to place a protective cover just above the cement to shield it.

Level The Area Being Paved As Much As Possible

Preparing the ground for the cement is one of the first and most important steps to take for ensuring that your project goes smoothly. In particular, you should strive to get the area being paved as level as possible. While it is possible to pour cement on an incline, this is a much more complicated and advanced project, which can make it ill-suited for your first attempt at pouring concrete. You may need to rent excavating equipment for level these areas, but this will be worth the costs and effort for ensuring your pavement is as strong and attractive as possible.

Allow For Full Curing Before Sealing The Concrete

Sealing concrete can greatly reduce the chances of it becoming damaged by moisture. While you may be excited to seal your newly pavement surface, you should wait until the concrete is fully dry and cured. It can take several weeks before concrete is fully dry as the moisture deep inside it will need time to escape. Sealing the concrete before this process is complete will trap this moisture in it. As a result, the concrete may start to experience structural problems fairly soon as being poured.

Contact a service, like Mershon Concrete , for more help.